All displays and panes are updated.
8.9 Overview Keep-Only Filter
The Overviews provide a convenient right-click Keep-Only filter that enables the user to keep
only the communicating devices shown on the line selected. All other communications are
hidden. This filter affects all panes.
To enable an Overview Keep-Only filter:
1. Select the desired Overview.
2. Select the line desired in the Overview.
3. Right-click, and select Keep Only ‘xx and yy’, where xx and yy are the two
communicating devices, as shown below:
The Overview and all panes are updated with the Keep-Only selection.
Display Filters | 111 of 201
To Next Page
Loading...
