The reset default menu appears:
4. Select Reset all settings to defaults or alternatively, select Reset only the selected
categories of setting below and check the desired categories.
5. Click on Finish.
5.2 Using Layouts
Layouts can be used to customize the size and position of the application’s various panes and
windows. Layouts can also be used to customize which panes and windows are displayed.
On installation of the analyzer application, a default layout is provided, but users may add
additional layouts as desired. Layouts are auto-saved, in that as changes are made to the
active layout, they are saved to that layout without any further action required by the user.
A reset feature is provided to set a layout to its original factory default parameters.
To create a new layout:
1. Select Layout | New Layout from the menu or click on the Add… button in the Layout
Quick-Menu, located at the top-right of the application interface:
Workspaces and Layouts | 57 of 201
To Next Page
Loading...
Need help?
General
