To define a new time span:
1. Type the new timing span in the span field.
2. The Instant Channels display updates to show the span specified.
To jump to another location:
1. Use the Navigator bar to jump to a selected location by double-clicking at the desired
location in the Navigator bar.
12.2 Synchronizing to Other Views
The Instant Channels display is synchronized to the active Overview (BR/EDR Overview or LE
Overview). As the user selects an event in these Overviews, the Instant Channels display will
orient to the location selected.
To disable synchronization with the active Overview:
1. On the Instant Channels toolbar, select the Options drop-down:
2. Select or de-select Follow overview selection as desired to follow or not follow selections
made in the active Overview.
Instant Channels | 163 of 201
To Next Page
Loading...
Need help?
General
