Analyzer User Guide
Appendix D – General Technical Data
RF Characteristics
Ellisys Rainbow™: Wideband, concurrent
capture of all BR/EDR/LE channels
Frequency band: 2.402-2.480 GHz
Sensitivity range: From -90 to +15 dBm
Gain: Programmable from -30 to +15 dB
Modulations: All BR/EDR/LE modulations
(GFSK, p/4-DQPSK, 8-DPSK)
Baseband: Support of Bluetooth 4.0,
4.1, upgradeable by software
Logic Capture Characteristics
Maximum bandwidth: 50 MHz
Sampling precision: 5 ns
Supported input voltage: 1.8 to 7V
HCI Capture Characteristics
USB transport: Low, Full, and High
Speed, with automatic detection
UART transport: Up to 8 Mbit/s,
automatic detection of all parameters
SPI transport: Up to 8 Mbit/s, automatic
detection of all parameters
Timing
Clock: ±1ppm frequency accuracy over -
10 to +60 degrees Celsius range
BR/EDR/LE timestamp accuracy: 125ns
USB HCI timestamp accuracy: 16.7ns
Logic timestamp accuracy: 5ns
Embedded Memory
128 MB of FIFO memory (HDD is
ultimate destination)
Data is stored in highly optimized format
Analyzed data is uploaded in real time
through a USB 2.0 connection
Front-Panel Connectors
Capture: Standard SMA female
HCI: USB 2.0 Standard-A and Micro-B
Rear-Panel Connectors
Computer: USB 2.0 Standard-B
Power: 12-17 VDC, max 18 W
Trigger: SMA in and out, 50 Ω, max
5VDC
IO Probe: supports UART / SPI HCI,
WCI-2 and logic analysis
Inter-equipment: in and out, supports
connection of several units
Power Supply
Universal 100-240 VAC, 50-60 Hz
12 VDC, 18 W
Enclosure
174 x 111 x 58 mm (6.9 x 4.4 x 2.3'')
1.0 kg (2.0 lbs.)
Hardware Upgrade
The Ellisys Rainbow™ engine is
automatically updated with each
software release (no user intervention
required)
Maintenance and Licensing
Free lifetime software updates – no
maintenance fees
Free full-featured viewer software –
easily share annotated traces between
computers and colleagues and replay
captured traffic
Use Ellisys hardware on any computer –
no additional licenses needed
Warranty
Two-year limited warranty
200 of 201 | Appendix D – General Technical Data