Analyzer User Guide
9.7 Throughput Graph
The Instant Timing throughput graph provides a characterization of L2CAP and SCO/eSCO data
throughput in synchronization with all other information displayed in the Instant Timing pane.
A mouse fly-over provides a throughput indication. The two throughput indications (L2CAP and
SCO/eSCO) are color-coded and may be superimposed if they occur at the same point in time.
L2CAP and SCO/eSCO throughput are differentiated by color as shown below.
L2CAP Throughput
SCO/eSCO Throughput
9.8 Using Markers
Markers may be added at any location within the Instant Timing pane. Markers can be edited to
add textual content and can be color-coded. For information on adding markers to an
Overview, see Section 7.6, Using Markers.
To add a marker in the Instant Timing pane:
1. Right-click on a location or event in the Instant Timing pane.
2. Select Add New Marker Here.
3. A marker is placed at the selected event/location.
122 of 201 | Instant Timing Pane
To Next Page
Loading...
Need help?
General
