Analyzer User Guide
10.8 Using Markers
Markers may be added at any location within the Instant Spectrum view. Markers can be edited
to add textual content and can be color-coded. For information on adding markers to an
Overview, see Section 7.6 Using Markers.
To add a marker in the Instant Spectrum view:
1. Right-click on a location or event in the Instant Spectrum view.
2. Select Add New Marker Here.
3. A marker is placed at the selected event/location.
To search markers:
1. Click on the Markers button (F9) on the toolbar.
A list of all markers installed appears:
2. Select the desired marker from the list.
The Instant Spectrum view jumps to the selected marker.
To delete a marker:
1. Position the mouse pointer over the marker to be removed.
2. Right-click and select Remove marker or alternatively, click on the Markers button (F9)
on the toolbar.
142 of 201 | Instant Spectrum View
To Next Page
Loading...
Need help?
General
