iTEMP TMT162 Operating menu and parameter description
Endress+Hauser 101
Current trimming 20 mA → 78
Navigation Setup → Advanced setup → Current output→ Current trimming 20 mA
Expert → Output → Current trimming 20 mA
Reset trim → 78
Navigation Setup → Advanced setup → Current output → Reset trim
Expert → Output → Reset trim
14.3.4 "Communication" submenu
"HART configuration" submenu
Device tag
→ 86
Navigation Diagnostics → Device information → Device tag
Expert → Communication → HART configuration → Device tag
HART short tag
Navigation Expert → Communication → HART configuration → HART short tag
Description Use this function to define a short tag for the measuring point.
User entry Up to 8 alphanumeric characters (letters, numbers and special characters)
Factory setting 8 x '?'
HART address
Navigation Expert → Communication → HART configuration → HART address
Description Use this function to define the HART address of the device.
User entry 0 to 63
Factory setting 0
To Next Page
Loading...
