iTEMP TMT162 Operating options
Endress+Hauser 27
6.3 Access to the operating menu via the operating tool
6.3.1
FieldCare
Function range
FDT/DTM-based plant asset management tool from Endress+Hauser. It can configure all
smart field devices in a system and helps you manage them. By using the status
information, it is also a simple but effective way of checking their status and condition.
Access is via the HART
®
protocol or CDI (= Endress+Hauser Common Data Interface).
Typical functions:
• Parameterization of transmitters
•
Loading and saving device data (upload/download)
• Documentation of the measuring point
• Visualization of the measured value memory (line recorder) and event logbook
For details, see Operating Instructions BA00027S/04/xx and BA00059AS/04/xx
Source for device description files
See information → 29
User interface
A0033862-EN
6.3.2 DeviceCare
Function range
The fastest way to configure Endress+Hauser field devices is with the dedicated DeviceCare
tool. DeviceCare's user-friendly design enables transparent and intuitive device connection
and configuration. Intuitive menus and step-by-step instructions with status information
ensure optimum transparency.
Quick and easy to install, connects devices in a single click (one-click connection).
Automatic hardware identification and driver catalog update. The devices are configured
using DTMs (Device Type Manager). Multilingual support, the tool is touch-enabled for
tablet use. Hardware interfaces for modems : (USB/RS232), TCP/IP, USB and PCMCIA.
To Next Page
Loading...
