Endress+Hauser iTEMP TMT162 - System Integration

iTEMP TMT162 System integration
Endress+Hauser 29
7 System integration
Version data for the device
Firmware version 04.01.zz • On the title page of the Operating instructions
• On the nameplate
• Firmware version
parameter
Diagnostics → Device info→ Firmware Version
Manufacturer ID 0x0011 Manufacturer ID parameter
Diagnostics → Device info→ Manufacturer ID
Device type ID 0x11CE Device type parameter
Diagnostics → Device info → Device type
HART protocol revision 7.6 ---
Device revision 4 • On the transmitter nameplate
• Device revision parameter
Diagnostics → Device info → Device revision
The suitable device description file (DD or DTM) for the individual operating tools is listed
in the table below, along with information on where the file can be acquired.
Operating tools
Operating tool Sources for obtaining device descriptions (DD) or device type
managers (DTM)
FieldCare
(Endress+Hauser)
• www.endress.com → Download Area → Software
•
CD-ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
DeviceCare
(Endress+Hauser)
www.endress.com → Download Area → Software
AMS Device Manager
(Emerson Process Management)
Please ask the operating tool manufacturer for information on where to
obtain the DD/DTM.
SIMATIC PDM
(Siemens)
Field Communicator 475
(Emerson Process Management)
Use update function of handheld terminal
FieldXpert SFX350, SFX370
(Endress+Hauser)
Use update function of handheld terminal
7.1 HART device variables and measured values
The following measured values are assigned to the device variables at the factory:
Device variables for temperature measurement
Device variable Measured value
Primary device variable (PV) Sensor 1
Secondary device variable (SV) Device temperature
Tertiary device variable (TV) Sensor 1
Quaternary device variable (QV) Sensor 1
It is possible to change the assignment of device variables to process variables in the
Expert → Communication → HART output menu.