Endress+Hauser iTEMP TMT162 - Certificates and Approvals

Technische Daten iTEMP TMT162
60 Endress+Hauser
Cable entries
Version Type
Thread 2x thread ½" NPT
2x thread M20
2x thread G½"
Cable gland 2x coupling M20
13.7 Certificates and approvals
CE mark The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EC directives. The manufacturer confirms
successful testing of the product by affixing to it the CE-mark.
EAC mark The product meets the legal requirements of the EEU guidelines. The manufacturer
confirms the successful testing of the product by affixing the EAC mark.
Ex approval Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by
your E+H Sales Center on request. All explosion protection data are given in separate
documentation which is available upon request.
MTBF HART®: 142 a
according to Siemens Standard SN29500
UL approval UL recognized component (see www.ul.com/database, search for Keyword "E225237")
CSA The product meets the requirements as per "CLASS 2252 05 - Process Control Equipment"
Maritime guidelines For the type approval certificates (GL, BV etc.) currently available, please contact your
Endress+Hauser Sales Center for information. All data relating to shipbuilding can be
found in separate type approval certificates which can be requested as needed.
Functional safety SIL 2/3 (hardware/software) certified to:
• IEC 61508-1:2010 (Management)
• IEC 61508-2:2010 (Hardware)
•
IEC 61508-3:2010 (Software)
For more detailed information please refer to the 'Functional Safety Manual'. →  61
HART® certification The temperature transmitter is registered by the HART® FieldComm Group. The device
meets the requirements of the FieldComm Group HART® Specifications, Revision 7.6.
Other standards and
guidelines
• IEC 60529:
Degree of protection provided by housing (IP code)
• IEC/EN 61010-1:
Safety requirements for electrical equipment for measurement, control and laboratory
use
•
IEC/EN 61326 Series:
Electromagnetic compatibility (EMC requirements)