iTEMP TMT162 Operating menu and parameter description
Endress+Hauser 113
Description Use this function to display the first, second and/or third part of the extended order code.
On account of length restrictions, the extended order code is split into a maximum of 3
parameters.
The extended order code indicates the version of all the features of the product structure
for the device and thus uniquely identifies the device. It can also be found on the
nameplate.
Uses of the extended order code
• To order an identical spare device.
• To check the ordered device features using the delivery note.
Manufacturer ID→ 103
Navigation Expert → Communication → HART info → Manufacturer ID
Expert → Diagnostics → Device information → Manufacturer ID
Manufacturer
Navigation Expert → Diagnostics → Device information → Manufacturer
Description Displays the manufacturer name.
Hardware revision
Navigation Expert → Diagnostics → Device information → Hardware revision
Expert → Communication → HART info → Hardware revision
Description Use this function to display the hardware revision of the device.
Configuration counter → 88
Navigation Diagnostics → Device info. → Configuration counter
Expert → Diagnostics → Device info. → Configuration counter
"Measured values" submenu
Sensor n value → 88
n = Stands for the number of sensor inputs (1 and 2)
To Next Page
Loading...
