Endress+Hauser iTEMP TMT162 - Enter SIL Checksum; Operational State

iTEMP TMT162 Operating menu and parameter description
Endress+Hauser 81
Description Indicates whether the device has been ordered with SIL certification.
The SIL option is required to operate the device in the SIL mode.
User entry • No
• Yes
Factory setting No
Operational state
Navigation Setup → Advanced setup → SIL → Operational state
Description Displays the device operational state in the SIL mode.
Display • Checking SIL option
• Startup normal mode
• Wait for checksum
• Self diagnostic
•
Normal mode
• Download active
• SIL mode active
• Safe para start
• Safe param running
• Save parameter values
• Parameter check
• Reboot pending
• Reset checksum
• Safe state - Active
• Download verification
• Upload active
• Safe state - Passive
• Safe state - Panic
• Safe state - Temporary
Factory setting Normal mode
Enter SIL checksum
Navigation Setup → Advanced setup → SIL → Enter SIL checksum
Description If the value '0' is entered in the SIL checksum, the device switches from the SIL mode to the
normal mode. Users can also quit the SIL mode using the Deactivate SIL parameter.
User entry 0 to 65535
Factory setting 0