Repair iTEMP TMT162
42 Endress+Hauser
Item No. 1 Housing
Cable entry:
1 2 x thread NPT ½" + terminal block + 1 dummy plug
2 2 x thread M20x1.5 + terminal block + 1 dummy plug
4 2 x thread G ½" + terminal block + 1 dummy plug
Version:
A Standard
TMT162G- A ← order code
Item No. 4 Electronics
Certificates:
A Non-hazardous area
B ATEX Ex ia, FM IS, CSA IS
Sensor input; communication:
A 1x; HART 5, FW 01.03.zz, DevRev02
B 2x; HART 5, FW 01.03.zz, DevRev02, config. output sensor 1
C 2x; FOUNDATION Fieldbus Device Revision 1
D 2x; PROFIBUS PA, DevRev02
E 2x; FOUNDATION Fieldbus FW 01.01.zz, Device Revision 2
F 2x; FOUNDATION Fieldbus FW 02.00.zz, Device Revision 3
G 1x; HART7, Fw 04.01.zz, DevRev04
H 2x; HART7, Fw 04.01.zz, DevRev04, config. output sensor 1
Configuration:
A 50 Hz mains filter
B Produced as per original order (quote serial number) 50 Hz mains
filter
K 60 Hz mains filter
L Produced as per original order (quote serial number) 60 Hz mains
filter
TMT162E- ← order code
Item No. Order code Spare parts
2,3 TMT162X-DA Display HART 5 + fitting kit + twist protection
2,3 TMT162X-DB Display PA/FF + fitting kit + twist protection
2,3 TMT162X-DC Display fitting kit + twist protection
2,3 TMT162X-DD Display HART 7 + fitting kit + twist protection
5 TMT162X-HH Housing cover blind, aluminum Ex d, FM XP with seal, CSA approval, only
as cover of connection compartment
5 TMT162X-HI Housing cover blind, aluminum + seal
5 TMT162X-HK Housing cover cpl. display, aluminum Ex d with seal
5 TMT162X-HL Housing cover cpl. display, aluminum with seal
5 TMT162X-HA Housing cover blind, stainless steel 316L Ex d, ATEX Ex d, FM XP with
seal, CSA approval, only as cover of connection compartment
5 TMT162X-HB Housing cover blind, stainless steel 316L, with seal
5 TMT162X-HC Housing cover cpl. display, Ex d, stainless steel 316L, ATEX Ex d, FM XP,
CSA XP, with seal
To Next Page
Loading...
