Diagnosis and troubleshooting Proline Prosonic Flow W 400 HART
136 Endress+Hauser
12.5 Diagnostic information in FieldCare or DeviceCare
12.5.1 Diagnostic options
Any faults detected by the measuring device are displayed on the home page of the
operating tool once the connection has been established.
A0008199
1 Status area with status signal → 132
2 Diagnostic information → 133
3 Remedial measures with service ID
In addition, diagnostic events which have occurred can be shown in the Diagnostics
menu:
• Via parameter → 141
• Via submenu → 142
Diagnostic information
The fault can be identified using the diagnostic information. The short text helps you by
providing information about the fault. In addition, the corresponding symbol for the
diagnostic behavior is displayed in front of the diagnostic information on the local display.
Diagnostic information
Diagnostic code
Diagnostic
behavior
Status signal
Diagnostic
number
Short text
↓ ↓ ↓
Example
A0013962 A0013958
441 Curr.output 1
NAMUR
NE 107
3-digit number
To Next Page
Loading...
