Endress+Hauser Proline Prosonic Flow W 400 - Setting the System Units

Proline Prosonic Flow W 400 HART Commissioning
Endress+Hauser 85
1
XXXXXXXXX
A0029422
 49 Header of the operational display with tag name
1 Tag name
Enter the tag name in the "FieldCare" operating tool →  77
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter Description User entry
Device tag Enter the name for the measuring point. Max. 32 characters, such as letters, numbers
or special characters (e.g. @, %, /).
10.4.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
Navigation
"Setup" menu → System units
‣
System units
Volume flow unit
→  86
Volume unit
→  86
Mass flow unit
→  86
Mass unit
→  86
Velocity unit
→  86
Temperature unit
→  86
Density unit
→  86
Length unit
→  86