Proline Prosonic Flow W 400 HART Accessories
Endress+Hauser 151
15 Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Endress+Hauser sales center or on the product page of the
Endress+Hauser website: www.endress.com.
15.1 Device-specific accessories
15.1.1 For the transmitter
Accessories Description
Transmitter
Prosonic Flow 400
Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output / input
• Display/operation
• Housing
• Software
For details, see Installation Instructions EA00104D
Post mounting kit Post mounting kit for transmitter.
Weather protection cover Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.
Order number: 71343504
Installation Instructions EA01191D
External WLAN antenna External WLAN antenna with 1.5 m (59.1 in) connecting cable and two angle
brackets. Order code for "Accessory enclosed", option P8 "Wireless antenna wide
area".
• The external WLAN antenna is not suitable for use in hygienic
applications.
• Additional information regarding the WLAN interface → 74.
Order number: 71351317
Installation Instructions EA01238D
Sensor cable
Proline 400
Sensor – transmitter
The sensor cable can be ordered directly with the measuring device (order code for
"Cable") or as an accessory (order number DK9017).
The following cable lengths are available:
• Temperature: –40 to +80 °C (–40 to +176 °F)
• Option AA: 5 m (15 ft)
• Option AB: 10 m (30 ft)
• Option AC: 15 m (45 ft)
• Option AD: 30 m (90 ft)
• Temperature: –40 to +130 °C (–40 to +266 °F)
• Option FA: 5 m (15 ft)
• Option FB: 10 m (30 ft)
• Option FC: 15 m (45 ft)
• Option FD: 30 m (90 ft)
Possible cable length for a Proline 400 sensor cable: max. 30 m (90 ft)
To Next Page
Loading...
