Endress+Hauser Proline Prosonic Flow W 400 - Connecting the Operating Tool

Operation options Proline Prosonic Flow W 400 HART
74 Endress+Hauser
8.5.1 Connecting the operating tool
Via HART protocol
This communication interface is available in device versions with a HART output.
1 2 3 5
8
4 7
6
A0028747
 45 Options for remote operation via HART protocol
1 Control system (e.g. PLC)
2 Field Communicator 475
3 Computer with operating tool (e.g. FieldCare, AMS Device Manager, SIMATIC PDM)
4 Commubox FXA195 (USB)
5 Field Xpert SFX350 or SFX370
6 Field Xpert SMT70
7 VIATOR Bluetooth modem with connecting cable
8 Transmitter
Via service interface (CDI-RJ45)
open
press
1
2
3
A0029163
 46 Connection via service interface (CDI-RJ45)
1 Computer with web browser (e.g. Microsoft Internet Explorer, Microsoft Edge) for accessing the integrated
device web server or with operating tool "FieldCare", "DeviceCare" with COM DTM "CDI Communication TCP/IP"
2 Standard Ethernet connecting cable with RJ45 plug
3 Service interface (CDI-RJ45) of the measuring device with access to the integrated web server
Via WLAN interface
The optional WLAN interface is available on the following device version:
Order code for "Display; operation", option G "4-line, illuminated; touch control + WLAN"