Endress+Hauser Proline Prosonic Flow W 400 - Transmitter Nameplate; Sensor Nameplate

Incoming acceptance and product identification Proline Prosonic Flow W 400 HART
16 Endress+Hauser
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The "Additional standard device documentation" and "Supplementary device-dependent
documentation" sections
• The Device Viewer: Enter the serial number from the nameplate
(www.endress.com/deviceviewer)
• The Endress+Hauser Operations app: Enter the serial number from the nameplate or
scan the DataMatrix code on the nameplate.
4.2.1 Transmitter nameplate
Order code:
i
Ext. ord. cd.:
Ser. no.:
Patents
i
Date:
1
2
3 4 5 6 7
8
9
10
111213
A0017346
 2 Example of a transmitter nameplate
1 Manufacturer address/certificate holder
2 Name of the transmitter
3 Order code
4 Serial number
5 Extended order code
6 Permitted ambient temperature (T
a
)
7 Firmware version (FW) and device revision (Dev.Rev.) from the factory
8 Degree of protection
9 Permitted temperature range for cable
10 2-D matrix code
11 Date of manufacture: year-month
12 CE mark, RCM mark
13 Electrical connection data, e.g. available inputs and outputs, supply voltage
4.2.2 Sensor nameplate
Date:
Tm:
i
Order code:
Type.:
Ser. no.:
2
1
3
4
5 6
7
8
9
10
A0043306
 3 Example of sensor nameplate, "front"
1 Name of sensor
2 Manufacturer address/certificate holder
3 Order code
4 Serial number
5 Model
6 Medium temperature range
7 Date of manufacture: year-month
8 Document number of safety-related supplementary documentation
9 Additional information