Accessories Proline Prosonic Flow W 400 HART
152 Endress+Hauser
15.1.2 For the sensor
Accessories Description
Sensor set (DK9018) • Sensor set 0.3 MHz (C-030)
• Sensor set 0.5 MHz (C-050)
• Sensor set 1 MHz (C-100)
• Sensor set 2 MHz (C-200)
• Sensor set 5 MHz (C-500)
Sensor holder set
(DK9014)
• Sensor holder set 0.3 to 2 MHz
• Sensor holder set 5 MHz
Installation set (DK9015) • Installation set, DN15-DN32, 1/2-1 1/4"
• Installation set, DN32-DN65, 1 1/4-2 1/2"
• Installation set, DN50-DN150, 2"-6"
• Installation set, DN150-DN200, 6"-8"
• Installation set, DN200-DN600, 8"-24"
• Installation set, DN600-DN2000, 24"-80"
• Installation set, DN2000-DN4000, 80"-160"
Conduit adapter set
(DK9003)
• Conduit adapter M20x1.5 + sensor cable gland
• Conduit adapter NPT1/2'' + sensor cable gland
• Conduit adapter G1/2'' + sensor cable gland
Coupling medium
(DK9CM)
• Coupling pad
• Coupling foil
• Coupling gel
15.2 Communication-specific accessories
Accessories Description
Commubox FXA195
HART
For intrinsically safe HART communication with FieldCare via the USB port
Technical Information TI00404F
Commubox FXA291 Connects Endress+Hauser field devices with a CDI interface (= Endress+Hauser
Common Data Interface) and the USB port of a computer or laptop.
Technical Information TI405C/07
HART Loop Converter
HMX50
Is used to evaluate and convert dynamic HART process variables to analog current
signals or limit values.
• Technical Information TI00429F
• Operating Instructions BA00371F
Wireless HART adapter
SWA70
Is used for the wireless connection of field devices.
The WirelessHART adapter can be easily integrated into field devices and existing
infrastructures, offers data protection and transmission safety and can be operated
in parallel with other wireless networks with minimum cabling complexity.
Operating Instructions BA00061S
Fieldgate FXA42 Transmission of the measured values of connected 4 to 20 mA analog measuring
devices, as well as digital measuring devices
• Technical Information TI01297S
• Operating Instructions BA01778S
• Product page: www.endress.com/fxa42
Field Xpert SMT50 The Field Xpert SMT50 table PC for device configuration enables mobile plant asset
management. It is suitable for commissioning and maintenance staff to manage
field instruments with a digital communication interface and to record progress.
This tablet PC is designed as an all-in-one solution with a preinstalled driver library
and is an easy-to-use, touch-sensitive tool which can be used to manage field
instruments throughout their entire life cycle.
• Technical Information TI01555S
• Operating Instructions BA02053S
• Product page: www.endress.com/smt50
To Next Page
Loading...
