Endress+Hauser Proline Prosonic Flow W 400 - Access to Operating Menu Via Local Display; Operational Display

Operation options Proline Prosonic Flow W 400 HART
56 Endress+Hauser
8.3 Access to operating menu via local display
8.3.1 Operational display
X X X X X X XX X
4
2
1
3
5
l/h
1120.50
F
A0029346
1 Operational display
2 Device tag →  84
3 Status area
4 Display range for measured values (up to 4 lines)
5 Operating elements →  61
Status area
The following symbols appear in the status area of the operational display at the top right:
• Status signals→  132
• F: Failure
• C: Function check
• S: Out of specification
• M: Maintenance required
• Diagnostic behavior→  133
• : Alarm
• : Warning
• : Locking (the device is locked via the hardware )
• : Communication (communication via remote operation is active)
Display area
In the display area, each measured value is prefaced by certain symbol types for further
description:
Measured variable Measurement channel
number
Diagnostic behavior
↓ ↓ ↓
Example
Appears only if a diagnostics
event is present for this
measured variable.
Measured variables
Symbol Meaning
Mass flow
Sound velocity