Proline Prosonic Flow W 400 HART System integration
Endress+Hauser 79
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.00.zz • On the title page of the manual
• On the transmitter nameplate
• Firmware version
Diagnostics → Device information → Firmware
version
Release date of firmware version 12.2021 ---
Manufacturer ID 0x11 Manufacturer ID
Diagnostics → Device information → Manufacturer ID
Device type code 0x5D Device type
Diagnostics → Device information → Device type
HART protocol revision 7 ---
Device revision 1 • On the transmitter nameplate
• Device revision
Diagnostics → Device information → Device revision
For an overview of the various firmware versions for the device → 147
9.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
HART protocol
Sources for obtaining device descriptions
FieldCare • www.endress.com → Downloads area
• USB stick (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
DeviceCare • www.endress.com → Downloads area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
• Field Xpert SMT70
• Field Xpert SMT77
Use update function of handheld terminal
AMS Device Manager
(Emerson Process Management)
www.endress.com → Downloads area
SIMATIC PDM
(Siemens)
www.endress.com → Downloads area
Field Communicator 475
(Emerson Process Management)
Use update function of handheld terminal
9.2 Measured variables via HART protocol
The following measured variables (HART device variables) are assigned to the dynamic
variables at the factory:
To Next Page
Loading...
