Endress+Hauser Proline Prosonic Flow W 400 - Navigation View

Operation options Proline Prosonic Flow W 400 HART
58 Endress+Hauser
8.3.2 Navigation view
In the submenu In the wizard
4
2
1
3
5
/../Operation
0091-1
Access stat.disp
Operator
Locking status
Display
A0013993-EN
S
4
2
1
5
3
/../Curr. output 1
Assign curr.
Volume flow
A0016327-EN
1
2
3
4
5
Navigation view
Navigation path to current position
Status area
Display area for navigation
Operating elements →  61
Navigation path
The navigation path to the current position is displayed at the top left in the navigation
view and consists of the following elements:
• The display symbol for the menu/submenu ( ) or the wizard ( ).
• An omission symbol (/ ../) for operating menu levels in between.
• Name of the current submenu, wizard or parameter
Display symbol Omission symbol Parameter
↓ ↓ ↓
Example / ../ Indication
For more information about the icons in the menu, refer to the "Display area" section
→  58
Status area
The following appears in the status area of the navigation view in the top right corner:
• In the submenu
• The direct access code to the parameter (e.g., 0022-1)
• If a diagnostic event is present, the diagnostic behavior and status signal
• In the wizard
If a diagnostic event is present, the diagnostic behavior and status signal
• For information on the diagnostic behavior and status signal →  132
• For information on the function and entry of the direct access code →  63
Display area
Menus
Symbol Meaning
Operation
Is displayed:
• In the menu next to the "Operation" selection
• At the left in the navigation path in the Operation menu