Endress+Hauser Proline Prosonic Flow W 400 - Incoming Acceptance; Product Identification; Identification; Incoming Acceptance and Product

Proline Prosonic Flow W 400 HART Incoming acceptance and product identification
Endress+Hauser 15
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
1
2
1
2
Are the order codes on the
delivery note (1) and the
product sticker (2) identical?
Are the goods undamaged?
Order code:
Ser. no.:
Ext. ord. cd.:
i
i
Date:
Does the data on the
nameplate match the order
specifications on the delivery
note?
Is the envelope present with
accompanying documents?
• If one of the conditions is not satisfied, contact your Endress+Hauser Sales Center.
• The Technical Documentation is available via the Internet or via the Endress+Hauser
Operations app: Product identification→  16.
4.2 Product identification
The device can be identified in the following ways:
• Nameplate
• Order code with details of the device features on the delivery note
• Enter the serial numbers from the nameplates in the Device Viewer
(www.endress.com/deviceviewer): all the information about the device is displayed.
• Enter the serial numbers from the nameplates into the Endress+Hauser Operations app
or scan the DataMatrix code on the nameplate with the Endress+Hauser Operations app:
all the information about the device is displayed.