Proline Prosonic Flow W 400 HART Diagnosis and troubleshooting
Endress+Hauser 147
Parameter Description User interface Factory setting
Extended order code 3 Shows the 3rd part of the extended order
code.
The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string –
Device revision Displays the device revision with which the
device is registered with the HART
FieldComm Group.
2-digit hexadecimal number –
Device ID Shows the device ID for identifying the
device in a HART network.
6-digit hexadecimal number –
Device type Displays the device type with which the
device is registered with the HART
FieldComm Group.
Hexadecimal number 0x69 (for Prosonic Flow W
400)
Manufacturer ID Displays the device's manufacturer ID
registered with the HART FieldComm Group.
2-digit hexadecimal number 0x11 (for Endress+Hauser)
12.13 Firmware history
Release
date
Firmware
version
Order code
for
"Firmware
version"
Firmware changes Documentation
type
Documentation
12.2021 01.00.zz Option 78 Original firmware Operating
instructions
BA02086D/06/EN/01.21
05.2024 01.01.zz Option 76 • Mounting type A0 -
1 set
• New FlowDC flow
obstructions
Operating
instructions
BA02086D/06/EN/02.24
It is possible to flash the firmware to the current version or the previous version using
the service interface.
For the compatibility of the firmware version with the previous version, the installed
device description files and operating tools, observe the information about the device
in the "Manufacturer's information" document.
The manufacturer's information is available:
• In the Download Area of the Endress+Hauser web site: www.endress.com →
Downloads
• Specify the following details:
• Product root: e.g. 9W4B
The product root is the first part of the order code: see the nameplate on the
device.
• Text search: Manufacturer's information
• Media type: Documentation – Technical Documentation