Endress+Hauser Proline Prowirl R 200 - Page 105

Proline Prowirl R 200 HART Commissioning
Endress+Hauser 105
Parameter Prerequisite Description Selection / User
entry
Factory setting
Mol% Cl2 The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Chlorine Cl2
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% CO The following conditions are
met:
In the Select medium
parameter, the Gas option is
selected.
– In the Select gas type
parameter, the Gas mixture
option is selected and in the
Gas mixture parameter, the
Carbon monoxide CO
option is selected.
Or
– In the Select gas type
parameter, the Natural gas
option is selected and in the
Density calculation
parameter, the ISO 12213-
2 option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% CO2 The following conditions are
met:
In the Select medium
parameter, the Gas option is
selected.
– In the Select gas type
parameter, the Gas mixture
option is selected and in the
Gas mixture parameter, the
Carbon dioxide CO2 option
is selected.
Or
– In the Select gas type
parameter, the Natural gas
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% H2 The following conditions are
met:
In the Select medium
parameter, the Gas option is
selected.
– In the Select gas type
parameter, the Gas mixture
option is selected and in the
Gas mixture parameter, the
Hydrogen H2 option is
selected.
Or
– In the Select gas type
parameter, the Natural gas
option is selected and in the
Density calculation
parameter, the AGA Nx19
option is not selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %