Endress+Hauser Proline Prowirl R 200 - Page 162

Diagnostics and troubleshooting Proline Prowirl R 200 HART
162 Endress+Hauser
Extended order code 2
→  162
Extended order code 3
→  162
ENP version
→  162
Device revision
→  163
Device ID
→  163
Device type
→  163
Manufacturer ID
→  163
Parameter overview with brief description
Parameter Description User interface Factory setting
Device tag Shows name of measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /).
Prowirl
Serial number Shows the serial number of the measuring
device.
Max. 11-digit character string
comprising letters and
numbers.
–
Firmware version Shows the device firmware version installed. Character string in the format
xx.yy.zz
–
Device name Shows the name of the transmitter.

The name can be found on the
nameplate of the transmitter.
Max. 32 characters such as
letters or numbers.
Prowirl
Order code Shows the device order code.

The order code can be found on the
nameplate of the sensor and
transmitter in the "Order code" field.
Character string composed of
letters, numbers and certain
punctuation marks (e.g. /).
–
Extended order code 1 Shows the 1st part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 2 Shows the 2nd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 3 Shows the 3rd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string 2.02.00