Epson Stylus Scan 2000 - Page 175

Troubleshooting 12-19
Blank pages print
Try one or more of these solutions.
❏ If you are using Windows, select the EPSON Stylus Scan as
the default Windows printer.
❏ If you are using Windows, check the settings in the Paper
dialog box. Make sure they match the paper size you are
using.
❏ If you are using Macintosh, check the settings in the Page
Setup dialog box. Make sure they match the paper size you
are using.
❏ Run the Head Cleaning utility to clear any clogged nozzles.
After trying one or more of these solutions, run a printing
operation check to see whether the problem has been solved. See
“Running a printer operation check” on page 12-5.
Printing is too slow
Try one or more of these solutions.
❏ Make sure the Media Type setting is set correctly in your
printer driver. For instructions, see “Making the Media Type
setting” on page 4-5 for Windows, or “Making the Media
Type settings” on page 6-4 for Macintosh.
❏ To increase speed, in the printer driver’s Main menu select
Automatic, then set the slide bar to the Speed setting. For
instructions, see “Using the Automatic setting” on page 4-7
for Windows or “Using the Automatic settings” on page 6-6
for Macintosh.
❏ Do not run too many applications at the same time. Close any
applications you are not using at the moment.
❏ Delete unnecessary files to make room on your hard disk
drive.