Rev. A Disassembly, Assembly, and Adjustments 5-11
TM-U950/U950P Technical Manual
Sub-assembly C: (For printers with stamp function)
4.* Slide the lever-stamp into tabs on the paper guide-lower.
5. Align hole of the lever-stamp drive with the cutout on the iron core and secure the lever
with the spring pin.
6. Mount the resulting part onto shaft , so that tab of the lever-stamp drive enters the
lever-stamp hole .
7. Align hole of the solenoid-stamp with dowel of the paper guide-lower and secure it
with the screw.
8. Hook the spring-stamp drive lever between hooks and .
✔
Checkpoint
Make sure that the lever-stamp moves smoothly.
b
c
f
d
e
g
h
i
j
Paper guide-lower assembly
CONFIDENTIAL
To Next Page
Loading...
