Rev. A Disassembly, Assembly, and Adjustments 5-37
TM-U950/U950P Technical Manual
Sub-assembly P: Paper Guide-Slip-Lower Assembly (If the printer has a MICR reader,
assemble the paper guide-slip-lower assembly B.)
1. Insert the paper holder plate into the paper guide-slip-lower or lower-B so that the dowels
match the five holes.
✔
Checkpoint
Verify that the paper hold plate is not deformed.
The procedure below is carried out only when the printer is equipped with a MICR reader.
2. Attach the MICR head to the paper guide-slip-lower B.
3. Pressing the MICR head against the parts marked and in the following illustration,
secure it with the two screws.
a
b
CONFIDENTIAL
To Next Page
Loading...
