1-6 Features and General Specifications Rev. A
❏ Slip paper
Dimensions: 70 x 70 to 210 x 297 mm (W x H)
(2.76 x 2.76 to 8.27 x 11.69”)
Thickness: 0.09 to 0.36 mm (.004 to .014”)
Temperature and copying capability
As copying capability is influenced by the ambient temperature, printing must be performed
under the conditions described in Table 1-3.
Paper thickness and copying capability
❏ Plain paper (single sheet): 0.09 to 0.2 mm
(.0035 to .0079”)
❏ Carbon copy paper (original + 4 copies)
Backing paper 0.06 to 0.15 mm (.002 to .006”)
Copy paper and original paper 0.04 to 0.07 mm (.0016 to .003”)
Carbon paper Approx. 0.035 mm (.001”)
Total thickness 0.30 mm (.012”) or less (1 to 1 + 3)
0.36 mm (.014”) or less (1 + 4)
❏ Pressure-sensitive paper (original + 4 copies)
Backing paper 0.06 to 0.15 mm (.002 to .006”)
Copy paper and original paper 0.06 to 0.075 mm (.002 to .003”)
Total thickness 0.24 mm (.009”) or less (1 to 1 + 3)
0.30 mm (.012”) or less (1 + 4)
Note:
When using multi-ply paper that consists of an original and three copies, be sure to print with a 9 x 9 font.
If a 7 x 9 font is used, some characters on some of the copies may not be readable.
Check paper (only when the printer is used with the MICR reader)
Paper type: Normal paper
Total thickness: 0.09 to 0.2 mm (.0035 to .0079”)
Table 1-3. Relationship Between Ambient Temperature and Number of Copies
Number of Copies Ambient Temperature
Original + 4 copies approx. 20
°
to 40
°
C (68
°
to 104
°
F)
Original + 1 to 3 copies 5
°
to 40
°
C (41
°
to 104
°
F)
CONFIDENTIAL
To Next Page
Loading...
