Essemtec Paraquda - November

About this Manual
xiv © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
Software Installation Startup & Safety ET7
Configuration Startup & Safety System ET7
Update Startup & Safety ET7
Spareparts Sparepart
Catalog
ET9
Teaching Startup & Safety Teach ET4 / ET5
Top Camera Configuration Maintenance System
Description Startup & Safety ET1
User
Management
Configuration Startup & Safety System ET7
History
Index
Release Date
Changes
01 January 10,
2011
First release.
02 May 31, 2011 Enhancement of safety chapter.
Adaptation to newest software version.
03 July 05, 2011 Adding of danger zones and location of safety labels.
Adding of Material Safety Data Sheets.
04 November 30,
2011
Terminology adjustment (replacing 'Trash' with 'Reject Bin').
Description of threshold setup on digital pressure switch of air
maintenance unit.
Adding the MSDS of the grease AFB-LF.
Adding Tray Changer description.
Minor corrections and update of pictures.
05 July 31, 2012 Chapter 'Configure Network Drives' added.
Chapter 'Solve Malfunctions' extended (more possible causes).
GUI camera window description extended with vision icons.
Handling of hyQ feeders added.
06 October 30,
2012
Chapter 'Operating of the Machine - Teach a Recipe - Set up Head Barcode
Reader' added (handling of barcodes used for traceability, read by the top
camera).
Chapter 'Operating of the Machine - Teach a Recipe - Set up Label / Label
Feeder' added (handling of label feeders, instruction how to create labels).