Essemtec Paraquda - 3.1 Operating Elements

Human Machine Interface HMI
3-2 © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
3.1 Operating Elements
3.1.1 Switches
Main Power Switch
The main power
switch is used to switch on or
off the machine's power supply and the
industrial PC.
Turning the main power switch to
I (ON)
position will start machine and PC.
Emergency Stop Button
There are 2 emergency stop buttons, one at the
front, one at the rear of the machine.
Pressing the emergency stop button will
immediately stop the machine. It is a controlled
stoppage at which the supply of energy for the
motors remains to provide a
definite stop. The
energy for the motors will be switched off as
soon as all axes stopped. Electronic control
system, PC and monitor are still powered.
Compressed air is not discontinued.