Safety
1-6 © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
1.5 Safety Labels Attached to System
Personnel must be familiar with all the warning symbols and decals fitted to the equipment. Failure
to recognize a warning and understand the associated safety instructions may result in injury or
death.
Check periodically the existence of safety labels on the equipment. Replace damaged or
missing labels immediately.
1.5.1 Meaning of the Safety Labels
The following symbols and decals are used on the machine:
Moving Parts, Keep Hands Out
Indicates that moving parts in this area can cause serious injury. Always
stop the machine prior to removing parts and/or performing
adjustments.
Electrical Hazards / Hazardous Voltage
Indicates an electrical hazard. Contact may cause electric shock or burn.
The machine must be switched off before removing any cover with this
decal on it.
CE mark for Paraquda
The CE marking is a key indicator of a product's compliance with EU
legislation.
Electrical Plate for Paraquda
The electrical plate states details of the power supply unit such as the
supply voltage and the necessary fuse protection (power mains) for the
Paraquda.
Hot Surface
Indicates machine parts that reach high temperatures. Coming into
contact with these components may result in serious burns.
Avoid contact with hot machine components and wear protective
gloves.
To Next Page
Loading...
