Essemtec Paraquda - 4.2 Production Operations

Operating of the Machine
4-16 © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
4.3.2 Run the Production
Start Production
Produce
Production
Note:
Before starting the production the PCB
has to be on conveyor input stage or on
production area in case of non conveyo
r
configuration.
(START button)
The machine loads (conveyor configuration) and
aligns the PCB. After successful alignment the
machine produces the amount of PCBs defined
in the job.
4.3.3 Stop the Production
Stop at any time
Any Tab
Any Menu
Any Submenu
(STOP button)
The already picked component will be processed
before the machine stops.