Equipment Overview
Paraquda Startup & Safety © Essemtec AG
2-3
0000003/11 / November 4, 2014
2.2.2 Typical Application of a Paraquda with Dispenser
Empty Printed Circuit
Board (PCB) or any
other substrate
Solder paste, adhesive
or other media
Paraquda equipped
with dispenser
Component filling
Applying adhesive
bumps
etc.
2.3 Module Description / Terms / Definitions
2.3.1 Safety Cover
Overview
Beside of the safety aspect, the cover has also a
functional one. It is a shield for extraneo
us light
(sunlight, room lighting etc.) which could disturb
the optical system of the machine.
To Next Page
Loading...