Essemtec Paraquda - Configure Feeders

Operating of the Machine
4-64 © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
Save new component
Teach
Recipe
Save or Save as... to save the new created dispense component.
4.6.3 Configure Feeders
Note:
CLM, Vibra, CSM and all future feeders will be recognized by the system automatically (after
first slide in). For all these feeders there is no configuration to do.
Configure Feeder
System
Configuration
Feeders
New feeder
Enter feeder name, choose type and model and
enter ID and barcode.
Save
to save the new created feeder.
Note:
It is not possible to edit a feeder