Essemtec Paraquda - Page 24

Safety
1-8 © Essemtec AG Paraquda Startup & Safety
0000003/11 / November 4, 2014
Power & Motor Controller Unit / Transformer Bay
Hazardous voltage. Contact will cause electri
c
shock, burn or death.
The machine must be disconnected from the
main electrical power supply before removing
the cover of the power and motor controller unit
and the transformer bay.
Check that the safety labels indicating 'HIGH
VOLTAGE' are properly i
n place (see picture).
There is a total of 2 labels.
PC Bay
Hazardous voltage. Contact will cause electric
shock, burn or death.
The machine must be disconnected from the
main
electrical power supply before removing
the PC.
Check that the safety labels indicating 'HIGH
VOLTAGE' are properly in place (see picture).
There is a total of 1 label.
Tray Changer Q (TCQ)
The cassette and the trays can move
unexpectedly. Reaching into the tray changer
can cause severe injury.
Check that the safety labels indicating 'KEEP
HANDS CLEAR' are properly in place (see
picture). A total of 1 label is placed.