7800/7700 MultiFrame Manual
7814 Series Dual HDTV Up/Down/Cross Converters
Page - 150 Revision 1.1.3
Inverts the phase or passes the selected audio channels. 100
Downmix Source X
Routes one of the 16 input audio channels to the X input of the
Channel 1 mixer.
97
Downmix Source Y
Routes one of the 16 input audio channels to the Y input of the
Channel 1 mixer.
99
D-VITC Source
This control selects the source of Timecode for the D-VITC
timecode to be embedded on the output.
130
Embedded AIC Gain
Used to correct audio gains of the embedded audio input. 81
Embedded AIC Inversion
Used to correct the inversion of the embedded audio input 81
Embedded Gain Adjust X
Sets the value of the gain from the selected source. 85
Embedded Gain Adjust Y
Sets the value of the gain from the selected source. 87
Inverts the phase or passes the selected audio channels. 85
Inverts the phase or passes the selected audio channels. 87
Embedded Source X
Routes one of the 16 input audio channels to the X input of the
Channel 1 mixer.
84
Embedded Source Y
Routes one of the 16 input audio channels to the Y input of the
Channel 1 mixer.
86
Enables or disables the Embedder Group. 79
Enables or disables the Embedder Group. 79
Enables or disables the Embedder Group. 79
Enables or disables the Embedder Group. 79
Enhancement Limit
Sets the maximum enhancement allowed. 49
Fault Duration
The Fault Duration control defines the amount of time that the
IntelliGain system detects the output level has been exceeded.
126
First Line Num in SD
Clean Ap
Defines the first active line for the SD Clean Aperture. 60
First Line Num in SD
Prod Ap
Defines the first active line for the SD Production Aperture. 60
First Pixel Num in SD
Clean Ap
Defines the first active horizontal pixel for the SD Clean Aperture. 60
Prod Ap
Defines the first active horizontal pixel for the SD Production
Aperture.
60
Force Freeze Frame
G Gain
Varies the Gain in RGB Domain. 45
Gamma Adjust
Enables gamma adjust. 46
To Next Page
Loading...
