Test Setup - Test Configurator, Timer, and System
140 88000 Series
Modify Structure Button
Topology allows the selection of the network test topology:
Single Port (default) or Dual Port.
Dual Port is only available with:
EtherSAM, RFC 2544, and Traffic Gen & Mon for rates up to
10G WAN.
EtherBERT for either rates up to 10G WAN framed/unframed or for
rates 40/100G Framed Layer 2.
OAM Type
Only available for Carrier Ethernet OAM test application.
Selects the type of Carrier OAM network: Ethernet OAM (S-OAM;
default), MPLS-TP OAM, or Link OAM.
S-OAM check box when selected enables S-OAM on all services.
Available for rates up to 10G WAN.
To Next Page
Loading...
