EXFO Power Blazer - Turning On the Unit; Starting the Module Application

Getting Started
18 88000 Series
Turning On the Unit
Turning On the Unit
Turn on the platform. Refer to the platform user guide for more
information.
Starting the Module Application
The module can be configured and controlled by starting the application(s)
as described in the following table:
To start the application:
From ToolBox X tap the desired application button.
Note: Refer to the respective user guides for more information on iORF, OpticalRF,
and BBU-Emulation applications.
Module Application Comment
88200NGE
88400NGE
88460
Power Blazer
88260 Power Blazer
iORF
OpticalRF
Only one application can run at once per module.
Furthermore, only one instance of the iORF or OpticalRF
application can run on the associated platform.
8880
8870
a
a. Only the OpticalRF application is available on RTU-2.
Power Blazer
iORF
b
OpticalRF
b
BBU-Emulation
b
b. Not supported on FTB-2 and LTB-8.
Only one application can run at once per module.
Furthermore, only one instance of the iORF, OpticalRF, or
BBU-Emulation application can run on the associated
platform.