EXFO Power Blazer - Analysis - MTIE;TDEV

Test Results
Power Blazer 477
Analysis - MTIE/TDEV
Analysis - MTIE/TDEV
From the Test menu, tap Results, Analysis, and the MTIE/TDEV tab.
Graph
Graphically displays the MTIE/TDEV values in function of the observation
interval. The MTIE and TDEV masks are also displayed when supported by
the selected standard.
 MTIE values and mask are displayed in pink.
 TDEV values and mask are displayed in blue.
Mask
Allows the selection of an ITU mask used to validate MTIE/TDEV statistics
(refer to Mask on page 382).
Remove Offset
Remove Offset check box when selected, subtracts the estimated
frequency offset from the Time Error/Time Interval Error data used to
calculate the MTIE/TDEV. It is preferable to set this setting before starting
the test since changing this setting while the test is running will require
some time for MTIE/TDEV recalculation.
MTIE
The MTIE check box when selected (default) reports MTIE values on the
graph. The MTIE pass/fail verdict is displayed when enabled.
TDEV
The TDEV check box when selected (default) reports TDEV values on the
graph. The TDEV pass/fail verdict is displayed when enabled.