EXFO Power Blazer - Summary (FlexO BERT)

Test Results
Power Blazer 559
Summary (FlexO BERT)
Summary (FlexO BERT)
From the Test menu, tap Results, and the Summary tab.
 Client ID indicates the client ID.
 Type indicates the client ODUk type.
 Status indicates the actual test status as follows:
 “--”: The test is not running or results are not available.
 In Progress: The test is running.
 Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
 Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset.
 Test Recover y, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recover y field. Refer to
Power Failure Recovery on page 743.
 Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 493.
FlexO-OTUCn
Displays for each instance, its number, port number, skew, FlexO alarms
(see FlexO - Group on page 416), and OTUCn alarms (see OTUCn on
page 446).