EXFO Power Blazer - Through Mode

Test Setup - Test Applications
80 88000 Series
Through Mode
Through Mode
The Through Mode test application allows traffic to pass through the unit
using two electrical or optical ports for in-service troubleshooting of live
traffic between the carrier/service provider network and the customer’s
network.
 Typical Through Mode test application:
 Supported Interfaces/Rates: 10M to 10GE LAN and 100GE;
10/100/1000M electrical is supported when using an active copper SFP
and the RJ45 port.
Tes t i ng U ni t
in Through Mode
Network Ethernet Network Ethernet
EXFO Unit