Test Results
Power Blazer 583
Summary (SyncE)
Summary (SyncE)
From the Test menu, tap Results, and the Summary tab.
Test Status displays the current status of the SyncE test. The global test
pass/fail verdict is displayed next to the Test Status when enabled (see
Pass/Fail Verdict on page 362).
Start Time indicates the time the test was started.
Test Recover y, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recover y field. Refer to
Power Failure Recovery on page 743.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 493.
Test Status Description
-- The test is not running or results are not available.
In Progress The test is running.
Completed The test is completed, stopped at the planned time, or manually
stopped when there is no set timer.
Aborted The test is interrupted; stopped before the set timer.
To Next Page
Loading...
