Test Results
Power Blazer 557
Summary (FlexE BERT)
Summary (FlexE BERT)
From the Test menu, tap Results, and the Summary tab.
Status indicates the actual test status as follows:
“--”: The test is not running or results are not available.
In Progress: The test is running.
Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset.
Test Recover y, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recover y field. Refer to
Power Failure Recovery on page 743.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 493.
FlexE Group
Indicates respectively for each PHY, its number, port number, link status
and skew (refer to page 649). For FlexE group global alarms, refer to FlexE
Group on page 415.
To Next Page
Loading...
