Test Setup - Test Applications
72 88000 Series
RFC 6349
RFC 6349
RFC 6349 is used to confirm that the Ethernet service is able to properly
carry TCP traffic.
The RFC 6349 test has to be executed in conjunction with a remote
compatible unit in RFC 6349 Dual Test Set or EXFO|Worx Interop
operation mode allowing bidirectional testing. The test provides
independent results for each test direction. The results from
local-to-remote and remote-to-local are available on the local testing unit.
Typical RFC 6349 test application:
Supported Interfaces/Rates: 10M to 10G LAN, 40G, and 100G.
EVC
Testing Unit Remote Unit
EXFO Unit
EXFO Unit
including BV Units
To Next Page
Loading...
