EXFO Power Blazer - RTD;RTT (CPRI;OBSAI Framed L2)

Test Functions
704 88000 Series
RTD/RTT (CPRI/OBSAI Framed L2)
RTD/RTT (CPRI/OBSAI Framed L2)
Note: Only available with CPRI/OBSAI Framed L2 in Base Station emulation
mode.
Round Trip Delay (RTD for CPRI) and Round Trip Time (RTT for OBSAI)
measurements are needed to quantify the time it takes for a signal to cross
the remote radio head and come back.
Note: Be aware that RTD/RTT requires error free operation conditions to provide
reliable results. Therefore, RTD/RTT results could be affected by error
injection or error introduced by the network.
From the Test menu, tap Functions, and the RTD/RTT tab.
Note: For Dual Port topology select the port to be displayed.
RTD RTT