Power Blazer 843
C Remote ToolBox
Overview
The Remote ToolBox application allows remotely controlling a module
installed on a platform using a remote PC. Remote users are connected to
the platform using an Ethernet connection.
Note: The remote control feature has to be enabled for the module on its specific
slot on the platform. Refer to the Controlling Modules Remotely section
from the platform user guide for more information.
The Remote ToolBox allows starting one or several module application(s).
Once a module application is started, the application is independent and
does not require the Remote ToolBox anymore. Thus, the Remote
ToolBox application can be closed or can be disconnected from the
platform using the Disconnect button without affecting the running remote
module applications.
To Next Page
Loading...
