Test Results
540 88000 Series
Summary (1588 PTP)
Summary (1588 PTP)
From the Test menu, tap Results, and the Summary tab.
Test Status displays the current status of the 1588 PTP test. The global
test pass/fail verdict is displayed next to the Test Status field when
enabled (see Pass/Fail Verdict on page 154).
Start Time indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset.
Test Recover y, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test Recover y field. Refer to
Power Failure Recovery on page 743.
Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 493.
Test Status Description
-- Idle state, the test is not running or results are not available.
In Progress The test is running.
Completed The test is completed, stopped at the planned time, or manually
stopped when there is no set timer.
Aborted The test is interrupted; stopped before the set timer.
For G.8265.1: [Message type] Request Denied, Session Canceled,
or No Reply is displayed next to Aborted when applicable.
For G.8275.1: Sync Message Rate Changed is displayed next to
Aborted when applicable.
To Next Page
Loading...
