EXFO Power Blazer - Traces;PT (FlexO)

Test Results
598 88000 Series
Traces/PT (FlexO)
Traces/PT (FlexO)
From the Test menu, tap Results, and Traces/PT.
Client ID available with FlexO BERT indicates the client ID for ODUk level.
OTUCn, ODUCn, and ODUk Buttons
Tap on either an OTU or ODU button.
SM/PM TTI Traces
Received Message
 SAPI indicates the received TTI (Trail Trace Identifier) Source Access
Point Identifier.
 DAPI indicates the received TTI Destination Access Point Identifier.
 Operator Specific indicates the received TTI Operator Identifier.
Expected Message
Note: The TTI Traces are configurable for SM (OTUx), PM (ODUx), and PM
(ODUk). The following settings are coupled with the Expected Message
from Traces/PT (FlexO) on page 376.
 SAPI allows editing the expected Source Access point Identifier (TTI
bytes 0 to 15). Available when the SAPI OTU/ODU-TIM check box is
selected.
 DAPI allows editing the expected Destination Access point Identifier
(TTI bytes 16 to 31). Available when the DAPI OTU/ODU-TIM check box
is selected.